The wheels on the same tractor can vary in circumference, so you need to ship your wheels to us to be custom fit.

A steel channel iron is formed to fit your wheel.  A rubber rib is then installed in the channel iron and the channel is tack welded to the wheels.

The lugs fit John Deere Steel wheels with the bolt dimensions shown (or any other wheels with the same dimensions). You do not need to drill new holes in your wheels.

The lugs have a steel band imbedded in the rubber to keep the bolts from putting through. Use 5/8" carriage bolts, nuts and washers.

Rubber lugs are not designed for tractor-pulls or heavy pulling.

For John Deere AR, GP, & D wheels, you need twelve rights and twelve lefts.